Hydro Jet Drain Cleaning for Stubborn Buildup

A cable can punch a hole through a clog, but it often leaves a film on the pipe wall that rebuilds over time. Hydro jetting uses a controlled stream of high pressure water from a nozzle to scour the whole pipe interior, which helps with grease, scale, silt and fine roots. It is a deeper clean, not simply a faster one.

Signs you may need Hydro Jet Drain Cleaning

• Repeat clogs after cabling in the same line
• Slow drains caused by grease buildup in kitchen lines
• Fine roots that keep returning to a sewer line
• A main line that drains but slowly, even after clearing
• Preparation before a camera inspection or relining

What Hydro Jet Drain Cleaning covers

Jetting is used on main lines and large branch lines with the right nozzle for the job, including nozzles that cut roots and ones that scour walls. A camera inspection beforehand confirms the pipe can handle the process, since damaged or collapsed sections need a different approach.

How the process works

1. 1

   Inspect first

   A camera check shows pipe condition and confirms jetting is a suitable choice for the line.

2. 2

   Access the line

   The hose is fed into a cleanout, with water flow and pressure set to the pipe type.

3. 3

   Scour the pipe

   The nozzle is pulled back through the line while the stream strips buildup from the walls.

4. 4

   Confirm with video

   A second look shows the cleaned walls, and the result is explained to you.

What Denver adds to the picture

Older Denver homes often have long runs of aging pipe, and grease or roots can narrow them over decades. Jetting can restore capacity in a sound line, while a camera first shows whether the pipe is strong enough for it.

What you can do now

Pour cooled cooking grease into a container rather than the drain, and run a hair catcher in showers. Prevention keeps jetting visits occasional instead of routine.

Questions about Hydro Jet Drain Cleaning